rej03d0122-1000 rev.10.00, mar 21, 2008 page 1 of 6 hd74lv1gt86a 2?input exclusive?or gate / cmos logic level shifter rej03d0122-1000 rev.10.00 mar 21, 2008 description the hd74lv1gt86a performs the boolean functions y = a b or y = a b + a b in positive logic. a common application is as a true / complement element. if one of the inputs is low, the other input will be reproduced in true form at the output. if one of the inputs is high, the signal on the other input will be reproduced inverted form at the output. the input protection circuitry on this device allows over voltage tolerance on the input, allowing the device to be used as a logic?level translator from 3.0 v cmos logic to 5.0 v cmos logic or from 1.8 v cmos logic to 3.0 v cmos logic while operating at the high-voltage power supply. low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. features ? the basic gate function is lined up as renesas uni logic series. ? supplied on emboss taping for high-speed automatic mounting. ? ttl compatible input level. supply voltage range : 3.0 to 5.5 v operating temperature range : ?40 to +85c ? logic-level translate function 3.0 v cmos logic 5.0 v cmos logic (@v cc = 5.0 v) 1.8 v or 2.5 v cmos logic 3.3 v cmos logic (@v cc = 3.3 v) ? all inputs v ih (max.) = 5.5 v (@v cc = 0 v to 5.5 v) all outputs v o (max.) = 5.5 v (@v cc = 0 v) ? output current 6 ma (@v cc = 3.0 v to 3.6 v), 12 ma (@v cc = 4.5 v to 5.5 v) ? all the logical input has hysteresis voltage for the slow transition. ? ordering information part name package type package code (previous code) package abbreviation taping abbreviation (quantity) HD74LV1GT86ACME cmpak?5 pin ptsp0005zc-a (cmpak-5v) cm e (3000 pcs/reel) hd74lv1gt86avse vson?5 pin pusn0005ka-a (tnp-5dv) vs e (3000 pcs/reel) note: please consult the sales office for the above package availability.
hd74lv1gt86a rej03d0122-1000 rev.10.00, mar 21, 2008 page 2 of 6 outline and article indication ? hd74lv1gt86a marking = control code t 8 index band cmpak?5 hd74lv1gt86a marking = control code t 8 vson?5 function table inputs a b output y l l l l h h h l h h h l h : high level l : low level
hd74lv1gt86a rej03d0122-1000 rev.10.00, mar 21, 2008 page 3 of 6 pin arrangement (top view) 5 4 v cc 1 2 3 in b in a gnd out y absolute maximum ratings item symbol ratings unit test conditions supply voltage range v cc ?0.5 to 7.0 v input voltage range *1 v i ?0.5 to 7.0 v ?0.5 to v cc + 0.5 output : h or l output voltage range *1, 2 v o ?0.5 to 7.0 v v cc : off input clamp current i ik ?20 ma v i < 0 output clamp current i ok 50 ma v o < 0 or v o > v cc continuous output current i o 25 ma v o = 0 to v cc continuous current through v cc or gnd i cc or i gnd 50 ma maximum power dissipation at ta = 25c (in still air) *3 p t 200 mw storage temperature tstg ?65 to 150 c notes: the absolute maximum ratings are values, which mu st not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. the input and output voltage rati ngs may be exceeded if the input and output clamp-current ratings are observed. 2. this value is limited to 5.5 v maximum. 3. the maximum package power dissipation was calc ulated using a junction temperature of 150c. recommended operating conditions item symbol min max unit conditions supply voltage range v cc 3.0 5.5 v input voltage range v i 0 5.5 v output voltage range v o 0 v cc v ? 6 v cc = 3.0 to 3.6 v i ol ? 12 v cc = 4.5 to 5.5 v ? ?6 v cc = 3.0 to 3.6 v output current i oh ? ?12 ma v cc = 4.5 to 5.5 v 0 100 v cc = 3.0 to 3.6 v input transition rise or fall rate ? t / ? v 0 20 ns / v v cc = 4.5 to 5.5 v operating free-air temperature t a ?40 85 c note: unused or floating inputs must be held high or low.
hd74lv1gt86a rej03d0122-1000 rev.10.00, mar 21, 2008 page 4 of 6 electrical characteristic ? ta = ?40 to 85c item symbol v cc (v) * min typ max unit test condition 3.0 to 3.6 1.5 ? ? v ih 4.5 to 5.5 2.0 ? ? 3.0 to 3.6 ? ? 0.6 input voltage v il 4.5 to 5.5 ? ? 0.8 v 3.3 ? 0.10 ? hysteresis voltage v h 5.0 ? 0.15 ? v v t + ? v t ? min to max v cc ?0.1 ? ? i oh = ?50 a 3.0 2.48 ? ? i oh = ?6 ma v oh 4.5 3.8 ? ? i oh = ?12 ma min to max ? ? 0.1 i ol = 50 a 3.0 ? ? 0.44 i ol = 6 ma output voltage v ol 4.5 ? ? 0.55 v i ol = 12 ma input current i in 0 to 5.5 ? ? 1 a v in = 5.5 v or gnd i cc 5.5 ? ? 10 a v in = v cc or gnd, i o = 0 quiescent supply current ? i cc 5.5 ? ? 1.5 ma one input v in = 3.4 v, other input v cc or gnd output leakage current i off 0 ? ? 5 a v in or v o = 0 to 5.5 v input capacitance c in 5.0 ? 2.5 ? pf v in = v cc or gnd note: for conditions shown as min or max, use the appr opriate values under recommended operating conditions. switching characteristics ? v cc = 3.3 0.3 v ta = 25c ta = ?40 to 85c item symbol min typ max min max unit test conditions from (input) to (output) ? 8.0 12.5 1.0 14.0 c l = 15 pf propagation delay time t plh t phl ? 9.5 17.0 1.0 19.0 ns c l = 50 pf a or b y ? v cc = 5.0 0.5 v ta = 25c ta = ?40 to 85c item symbol min typ max min max unit test conditions from (input) to (output) ? 5.5 7.5 1.0 8.5 c l = 15 pf propagation delay time t plh t phl ? 6.5 10.3 1.0 11.5 ns c l = 50 pf a or b y operating characteristics ? c l = 50 pf ta = 25c item symbol v cc (v) min typ max unit test conditions power dissipation capacitance c pd 5.0 ? 11.0 ? pf f = 10 mhz
hd74lv1gt86a rej03d0122-1000 rev.10.00, mar 21, 2008 page 5 of 6 test circuit pulse generator 50 ? c l input output v cc note: operating current test time, output is open. waveforms input in phase output 90% vref 10% t plh t phl v i gnd v oh v ol t r t f t phl t plh 90% vref 10% 50% 50% 50% 50% out of phase output v oh v ol v cc (v) vref t r / t f 3.30.3 2.5 v v i inputs 50% 1.5 v 3 v 5.00.5 3.0 ns 3.0 ns notes: 1. input waveform : prr 1 mhz, zo = 50 ? . 2. the output are measured one at a time with one transition per measurement.
hd74lv1gt86a rej03d0122-1000 rev.10.00, mar 21, 2008 page 6 of 6 package dimensions e a eh e l l 1 q c d b aa pattern of terminal position areas b 2 l 1 e 1 e a 3 l p s a a 2 a 1 a a 1 a 2 b b 1 c c 1 d e e h e l l p x y b 2 e 1 l 1 q 0.8 0 0.8 0.15 0.1 1.8 1.15 1.8 0.3 0.2 0.22 0.25 0.9 0.13 0.11 2.0 1.25 0.65 2.1 1.5 0.25 1.1 0.1 1.0 0.3 0.2 0.15 2.2 1.35 2.4 0.7 l 1 0.1 0.5 0.6 0.05 0.05 0.35 0.9 dimension in millimeters reference symbol min nom max a 3 a s m x s y sc-88a 0.006g mass[typ.] cmpak-5 / cmpak-5v ptsp0005zc-a renesas code jeita package code previous code b a-a section b 1 c 1 c 1 e 1 3 54 d e b a h c l 1.0 0.1 0.1 () 0.1 () 0.3 0.2 0.15 a 1 1.3 1.1 1.55 1.6 1.55 0.12 0.5 e e l p x y 0.2 1.65 1.65 0.22 0.07 l 1 c 1 c z d b a e d b 1 h e a 2 0.6 1.2 1.6 reference symbol dimension in millimeters min nom max p-uson5-1.2x1.6-0.50 0.002g mass[typ.] tnp-5d/tnp-5dv pusn0005ka-a renesas code jeita package code previous code
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas product s for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of t he use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application ci rcuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attentio n to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the t otal system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding th e suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this do cument or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not desi gned, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of h uman injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion co ntrol, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a r enesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to us e renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, dir ectors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas sha ll have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristic s such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the poss ibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software includin g but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, sinc e the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from r enesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renes as semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7858/7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2377-3473 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 3518-3399 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, m alaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2008. renesas technology corp., all rights reserved. printed in japan. colophon .7.2
|
